Begagnad Doepfer LC9 case vintage edition i mycket bra skick.
This an enlarged version of the A-100 low cost case with 9 U or three rows of modules. As only one power supply is required this is the most economic version of the A-100 low cost case. Apart from that the 9U version is identical to the 6U version.
The case is made of raw wood without laquering. The case can be varnished by the customer in any desired color e.g. by means of a spray can.
It is also available with black coating: A-100LC9V
outside: approx. 445 (width) x 420 (height) x 160 (depth) mm
inside: 3 x 84 HP x 3 U (three bus boards), usable depth for A-100 modules: approx. 80 mm in the power supply area (bottom right), resp. approx. 110 mm in the remaining area (measured from inner side of the front panel until end of the pc board of the module)
* Quantity of bus boards: 3
* Weight (without modules): about 5,2 kg
* A-100PSU3: +12V/2000 mA, -12V/1200mA, +5V/4000mA