RYO Paths, complete DIY Kit
Cycling Sequential Switch
A 4x4 cycling sequential switch, featuring simultaneous forward/reverse stepping, hold, reset, and an additional voltage controlled mode based on the same design as our VC Sequencer. Also on board are push buttons for each function enabling you to play and perform the switching with a more human input.
This sequential switch will do all your standard 1>2, 1>3, 1>4 or the other way around with great real-time as well as external voltage controllability, but its when you start playing around with multiple sources and destinations that things start getting fun and weird! You could for instance shuffle around four different trigger patterns to trigger four different percussive generators for interesting variations, or why not 4 oscillators shuffling between 4 different destinations, panned and processed in various ways? Whatever your sequential switch application might be, we're confident the Paths is up to the task!
The module sizes in at 8hp in width with a depth of 46mm with power cable attached.
• 30 mA +12V
• 8 mA -12V
• ? mA 5V
• 46 mm Depth
Module is available as a DIY project only.