Product Description:
The ES-6 is the counterpart to the ES-3 Lightpipe/CV Interface, offering up to 8 channels of CV input with output via an optical lightpipe connection.
The ES-6 itself has 6 input sockets; the remaining 2 channels are provided by an expansion module e.g. the ES-7.
Please note that a connected ES-3 is required for operation. The ES-6 gets its clock signals from the ES-3, which derives them from its lightpipe input.
The ES-6s specifications are as follows:
• Panel width: 6HP
• Module depth: 52mm
• Sync input: connection from ES-3 module
• Analogue inputs: 6x 3.5mm jacks, DC-coupled
• Input voltage range: ±10V
• Input impedance: effectively infinite (FET buffer)
• Digital output: optical, ADAT Lightpipe standard
• A/D conversion: 24 bit, 103dB SNR typical Expansion
• Header for connecting expansion modules e.g. the ES-7
• Current draw: 67mA on the +12V rail, 24mA on the -12V rail (91mA total)
The front panel is drilled for both Doepfer and Analogue Systems mounting holes (using a 'slot' rather than a single round hole). The power connector is a Doepfer standard 16 way IDC, with -12V furthest from the top of the board.
Note that connection to the ES-3 is by a simple plug-in cable for the ES-3 mk2 only. The original ES-3 requires some soldering to add the required connections.
ES-6 mk2
February 2017 sees the launch of the "ES-6 mk2". Functionally equivalent to the original ES-6, the mk2 adds these improvements:
• Illuminated jack sockets
• Less HP
• Less deep
