E580 Resampling mini-delay module
The synthesis technology e580 resampling mini-delay emulates the classic sounds of digital, bbd and tape-based delays with 4 parameters under voltage control. the 14hp wide euro module accepts either +-12v euro standard power or +-15v motm/frac power. using a 40mhz dsp and 24-bit codec, the e580 recreates the pitch-shift modulating of bbds with the variable bandwidth and noise floor without costly bbd ics. in tape mode, wow& flutter, tape saturation and non-linear distortion model classic tape units without the bulk and maintenance. there are 2 simultaneous audio outputs: a straight delay and a variable tapped delay. the tap position is a percentage of the main delay time. this allows very short delays (<350us) as well as long delays (750ms). both tap position (‘offset’) and main delay time are voltage-controlled over a -5v to +5v range.
Feedback is jumper-selectable from either the tapped position or the main delay. this flexibility can generate standard ‘rhythmic’ delays (feedback from main delay) or a series of "pre-delay reflections" (tapped delay) which sound very different from each other.