Produktbeskrivning:
Doepfer Low Cost Case 9U with Doepfers new PSU3.
PSU3 gives 2000mA@+12V, 1200mA@-12V and additional +5V with 4000mA. +5V are no longer required for A-100 modules but there are many modules from other manufacturers that require +5V.
Specifications:
• outside: approx. 445 (width) x 420 (height) x 160 (depth) mm
• inside: 3 x 84 HP x 3 U (three bus boards), usable depth for A-100 modules: approx. 80 mm in the power supply area (bottom right), resp. approx. 110 mm in the remaining area (measured from inner side of the front panel until end of the pc board of the module)
• Weight (without modules): about 5,2 kg