• Betala säkert med kort
  • Frågor? Maila oss
0
Varukorg
RYK Envy Machine DIY Kit
RYK Envy Machine DIY Kit
RYK Envy Machine DIY Kit - 2
RYK Envy Machine DIY Kit - 3

RYK Envy Machine DIY Kit

2 500 SEK
A compact quad-channel modulation machine. DIY Kit.
Läs mer...

Leverans: Köp nu

  • Betala säkert med kort
  • Maila oss, vi svarar snabbt!

\* Redigera dessa rader under Innehåll > Produktsida

Beskrivning

Art.nr: RYKEMDIY

A compact quad-channel modulation machine, with an envious array of Envelopes, LFOs, random voltages even Knob Recording.
With four channels of modulation, ENVY MACHINE makes an ideal companion to the RYK ALGO module

Each of the four channels on the ENVY MACHINE can be set to one of five super-flexible modulation modes:
- ADSR Envelope
- AD Envelope
- AD LFO
- Random Voltage
- Recordable Knob Voltage Control

Ghost hand - Parameters can be animated using KNOB RECORDING to create timed variations in your patch.
Oh, and with the dedicated MOD input per channel, you can use an external CV to control anything - TIME, LEVEL, WAVESHAPE, colour of your hair etc . . .

Polarity paradox - Modulation inputs AND channel Outputs come with bipolar attenuverters, now you can choose either bipolar or unipolar, with continuously variable level control.

Slippery slopes - WAVESHAPES are continuously variable between LOG, EXPO, SIN, TRAPEZOID, and SQUARE !

TECHNICAL SPECIFICATIONS

TIME
Envelopes: 1.5ms – 4min
LFO: 88hz – 7min
Random: 2khz - 2min

OUTPUT VOLTAGE RANGE
Envelopes: 0/8V (inverted: 8V/0V)
LFO/Random: 0/8V (Unipolar) or -5V/+5V (Bipolar)

INPUT VOLTAGE RANGE
-5V/+5V

DIMENSIONS
12 HP wide
25 mm deep

POWER CONSUMPTION
-12V 5mA
+12 70mA

PLEASE NOTE THE KIT IS ONLY SUITABLE FOR EXPERIENCED BUILDERS.

WARNING:
To build the kit you MUST have the following:

- Clean high quality 2/3mm tip solder iron [ chisel type recommended ]
- Mini Phillips screwdriver for M2 and M3 screws
- Electrical insulation tape

The PCB is double sided, and any mistakes soldering some parts might be very difficult to fix later

 

This is a complete kit for Eurorack, Including all parts:

1 Main PCB (All SMD parts come already pre-soldered), a high quality screenprinted 2mm aluminium panel, encoders, knobs, switches, LED Display PCB, jack sockets.
Includes USB data cable for firmware install, and sexy black Eurorack power cable.

 

  • ButiksadressRoslagsgatan 19, 11355 Stockholm
  • FunktionADSR/Envelope Generator
  • SkickNy
  • TillverkareRYK Modular
Tillbaka till toppen