Expert Sleepers ES-3 mk4
Val
Pris
Frontpanel i svart aluminium
2 300 SEK
- Betala säkert med kort
- Maila oss, vi svarar snabbt!
\* Redigera dessa rader under Innehåll > Produktsida
Beskrivning
Art.nr: ES-ES3-4
ES-3 mk4 Lightpipe/CV interface
The ES-3 is a Eurorack format module which converts eight channels of ADAT Lightpipe input to DC coupled outputs on 3.5mm jacks, for the ultimate convenience in connection of a DAW directly to analogue synthesizers.
The outputs can be used as control voltages (CVs), for example with software such as Expert Sleepers Silent Way, and can also be used as audio outputs at high, modular synth-compatible levels.
With the ES-3, a single optical cable is all that is need to bring direct CV control from your DAW right into the heart of a modular system. * Panel width: 8HP * Module depth: 53mm * Input connection: optical, ADAT Lightpipe standard * D/A conversion: 24 bit, 105dB SNR typical * Output connections: 8x 3.5mm jacks, DC-coupled * Maximum output voltage: approximately ±10V DC * Indicators: LED for ADAT clock sync; 2 LEDs per channel indicate output voltage (+ve/-ve)
The module is available as standard with a black aluminium or translucent black acrylic front panel.
The ES-3 produces 8 outputs as normal when the ADAT interface is operated at 44.1/48kHz. In double speed mode (88.2/96kHz), the ES-3 outputs 4 channels, duplicated across pairs of outputs (ES-3 outputs 1/2 carry ADAT channel 1, outputs 3/4 carry ADAT channel 2 etc.).
February 2017 sees the launch of the "ES-3 mk4". Functionally equivalent to the ES-3 mk3, the mk4 adds these improvements:
• Illuminated jack sockets
• Less deep
The ES-3 is a Eurorack format module which converts eight channels of ADAT Lightpipe input to DC coupled outputs on 3.5mm jacks, for the ultimate convenience in connection of a DAW directly to analogue synthesizers.
The outputs can be used as control voltages (CVs), for example with software such as Expert Sleepers Silent Way, and can also be used as audio outputs at high, modular synth-compatible levels.
With the ES-3, a single optical cable is all that is need to bring direct CV control from your DAW right into the heart of a modular system. * Panel width: 8HP * Module depth: 53mm * Input connection: optical, ADAT Lightpipe standard * D/A conversion: 24 bit, 105dB SNR typical * Output connections: 8x 3.5mm jacks, DC-coupled * Maximum output voltage: approximately ±10V DC * Indicators: LED for ADAT clock sync; 2 LEDs per channel indicate output voltage (+ve/-ve)
The module is available as standard with a black aluminium or translucent black acrylic front panel.
The ES-3 produces 8 outputs as normal when the ADAT interface is operated at 44.1/48kHz. In double speed mode (88.2/96kHz), the ES-3 outputs 4 channels, duplicated across pairs of outputs (ES-3 outputs 1/2 carry ADAT channel 1, outputs 3/4 carry ADAT channel 2 etc.).
February 2017 sees the launch of the "ES-3 mk4". Functionally equivalent to the ES-3 mk3, the mk4 adds these improvements:
• Illuminated jack sockets
• Less deep
- ButiksadressRoslagsgatan 19, 11355 Stockholm
- FunktionCV/Audio Interface
- SkickNy
- TillverkareExpert Sleepers