Doepfer A-180-2

A-180-2 is a simple multi-connectors. They have eight inter-connected sockets, so that you can "multiply" any audio or control signal. From the factory the module come as two four-fold multiples. But they can be modified as an eight-fold multiple (solder bridge on the pcb). Though these modules are very "primitive" they are required very often in patches (e.g. to distribute a clock signal or a control voltage). Within a big A-100 system sufficient multiples should be planned. For the distribution of control voltages used for pitch control of several VCOs a buffered multiple is recommended. This module has a built in buffer (and a lot of additional features like CV summing) that avoids small voltage losses that may be heard in pitch control applications. • 2 HP • Passive