DPW Design SW3 Splice
€181.60
Wavesplicing made simple. It works both with audio and control signals or a mix of those.
- Secure payment by card
- E-mail us, we reply swiftly!
\* Edit these rows under Content > Product page
Description
Article no.: DPWSW3
The SW3 is a module to splice (switch) any signal together with something else click free.
It is a fully analog module that doesn't add any latency or phase delay to what is fed through it.
The splicing can be two types of click free switching or traditional hard switching. Manual or CV controlled.
It can be dual mono, stereo coupled or switching mono into stereo for big stereo fields.
The core of this module are two analog switches with some intelligent control to be able to do all sorts of wave splicing. The inputs to the two switches are in on A1 and B1 and out on OUT1 for the first switch. A2 and B2 and out on OUT2 for the second.
6 hp wide, 29 mm deep with power connector.
Power requirements: +12V. Max power consumption 15 mA, -12V. Max power consumption 10 mA
It is a fully analog module that doesn't add any latency or phase delay to what is fed through it.
The splicing can be two types of click free switching or traditional hard switching. Manual or CV controlled.
It can be dual mono, stereo coupled or switching mono into stereo for big stereo fields.
The core of this module are two analog switches with some intelligent control to be able to do all sorts of wave splicing. The inputs to the two switches are in on A1 and B1 and out on OUT1 for the first switch. A2 and B2 and out on OUT2 for the second.
6 hp wide, 29 mm deep with power connector.
Power requirements: +12V. Max power consumption 15 mA, -12V. Max power consumption 10 mA
- ConditionNew
- FunctionSignal Processor
- HP6
- ManufacturerDPW Design
- Store AddressRoslagsgatan 19, 11355 Stockholm