Used Doepfer A-110-1
€113.50
Used Doepfer A-110-1 in good condition.
- Secure payment by card
- E-mail us, we reply swiftly!
\* Edit these rows under Content > Product page
Description
Article no.: BegDoepferA1101
Standard VCO for Modular System A-100Module A-110-1 (VCO) is a voltage controlled oscillator. The A-110-1 produces frequencies in a thomann range of about 8 octaves, of which four waveforms are available simultaneously: pulse, sawtooth, triangle and sine wave.
The frequency of the VCO is determined by the position of the range switch and tune controller and the control voltages at the CV inputs. Thus, the VCO provides the thomann possibility of frequency modulation. You can set the footage (octave of the fundamental) with the selector switch. The Tune control is used to fine tune the VCO frequency.
In the pulse wave the pulse width can be adjusted manually or by voltage control or modulated (PWM).
• Width: 10 thomann HP/ 50.5 mm
• Depth: 55 mm (measured from the rear of the front panel)
• Power requirements: +90 mA (+12V)/ -20 mA (-12V)
The frequency of the VCO is determined by the position of the range switch and tune controller and the control voltages at the CV inputs. Thus, the VCO provides the thomann possibility of frequency modulation. You can set the footage (octave of the fundamental) with the selector switch. The Tune control is used to fine tune the VCO frequency.
In the pulse wave the pulse width can be adjusted manually or by voltage control or modulated (PWM).
• Width: 10 thomann HP/ 50.5 mm
• Depth: 55 mm (measured from the rear of the front panel)
• Power requirements: +90 mA (+12V)/ -20 mA (-12V)
- ConditionUsed
- ManufacturerDoepfer
- Store AddressRoslagsgatan 19, 11355 Stockholm